How To Make A Song On Logic

Trying to learn to utilize Logic Pro Ten? You're in luck.

It may seem complicated correct now, but by reading this guide, you'll learn everything you lot need to know to turn your ideas into full songs.

We're covering ALL the basics of this incredible DAW.

Before we go started, though, make sure to grab my free Logic Pro X cheat sheet. It's a fantastic summary of everything I get over in this guide.

If y'all're just starting to acquire this astonishing software, information technology'll be a huge assist to keep this by your side for reference.

Grab it here:

Contents

• Logic Pro X Tutorial (Everything You Need To Know)
• Part 1: Getting Comfortable with Logic's Visual Interface
  • The Primary Interface
  • The File Carte
  • Adjacent, Bank check Your Sound Preferences
  • Key Commands: The Ultimate Time Saver
• Office 2: Recording Audio Tracks Logic Pro X
  • IMPORTANT: Record Enabling and Input Monitoring
  • Recording Multiple Takes
• Office 3: Editing Audio Tracks Logic Pro X
  • The Inspector View
  • Adding Fades in Logic Pro X
  • Bonus Tip: Adjusting the Waveform View
• Part iv: Mixing Audio Tracks Logic Pro X
  • Sends and Aux Tracks
• Part 5: Using the Stereo Output Channel
• Office 6: Recording MIDI
• Part 7: Using the MIDI Editor Window
  • Quantizing MIDI
• Function eight: Making MIDI Sound Realistic
  • Quantization Forcefulness
  • Changing the Velocity of MIDI Notes
  • Humanization
• Role nine: Quick and Easy Drums with Logic Pro's Drummer
  • Making Your Drummer Track Feel More Lifelike
• Part 10: Using Your Own Samples in Logic
• Part 11: Getting Artistic with Apple tree Loops
  • And that'due south just the kickoff!
• Conclusion: Logic Pro Tutorial

Logic Pro Ten Tutorial (Everything Yous Need To Know)

Trying to learn to utilize Logic Pro X? You're in luck. It may seem complicated right now, but past reading this guide, you'll acquire everything you need to know to turn your ideas into full songs. We're covering ALL the basics of this incredible DAW. Before nosotros get started, though, brand sure to catch my fre

Part 1: Getting Comfy with Logic'southward Visual Interface

It's like shooting fish in a barrel to be intimidated when you lot open up Logic Pro Ten for the showtime time.

There are a lot of buttons and screens. Where do you fifty-fifty starting time?

But don't worry! It'southward not as complex as it first seems.

Let's break down the interface step by step then y'all know exactly what you're looking at when you open up a project.

We'll commencement with the main interface.

The Master Interface

Just below the navigation dropdowns is the main interface.

This is where you lot'll brand changes that touch on your entire projection. 1 example is changing the tempo of your vocal.

There'south a lot to look at here, but we're simply going to focus on the necessities.

First things first, check out the "Quick Aid" button on the left side of the screen.

Quick Help gives y'all a cursory description of what everything on your screen does. So if you're new to Logic Pro, you'll want to have it on.

But hover your mouse over a push button you don't sympathize, and Quick Assist volition tell yous exactly what information technology does.

To the right of Quick Help is the playback send. This is where y'all start and stop your song and even brainstorm recording.

I adopt to use key commands for all these functions. We'll dig into key commands at the end of this department!

In the middle of the main interface is the LCD. If y'all want to change the tempo, key, or time signature of the song, you tin practice that in this center section.

You tin make this window bigger if you lot'd like. Click the dropdown to the right and select "Beats & Project (Large)."

You can change your metronome settings to the correct of the LCD window. Clicking the metronome image will turn the metronome on and off.

I usually go out the metronome on while recording and turn it off while listening dorsum.

The "1234" adjacent to the metronome is your count-in. When count-in is turned on, you'll accept an actress measure of lead-up before Logic Pro starts recording.

If y'all want to start a new projection or save your electric current one, this is where you'll do information technology.

The file menu is also where y'all'll bounciness your track. Bounce is just a fancy give-and-take for exporting your projection into a regular sound file.

Yous might call up y'all'd hitting the "Export" button to consign your track. But for some reason, "Bounce" is the bodily export button.

Why? Sometimes the globe is a lawless and irrational identify.

NOTE: Y'all tin save a bunch of setup time for each new projection by making a template:

Trying to learn to employ Logic Pro Ten? You're in luck. It may seem complicated right now, only past reading this guide, you lot'll learn everything you need to know to turn your ideas into full songs. We're covering ALL the nuts of this incredible DAW. Before we get started, though, make certain to grab my fre

Next, Bank check Your Audio Preferences

Open the "Logic Pro X" dropdown at the top left of your screen, open the "Preferences" menu, and select "Sound."

This'll open the audio preferences window. This is where you can change your input and output devices, which is what you're using to record and mind through.

If I'm recording with an audio interface, I'll select my interface equally my input and output device.

If yous're listening through your computer's speakers, you'll want to make certain those are set as the output device.

The audio preferences window is also where you tin change the buffer size. The higher the buffer size, the more time your estimator will spend processing the sound.

Pick the lowest buffer size possible while recording. A higher buffer size will cause latency, which can really throw off a musical performance.

Merely be conscientious! Non all computers can handle extremely low buffer sizes. If you hear pops in your recording, your buffer size might be besides low.

Pick a buffer size that's low enough to avert latency simply besides isn't and then low your estimator can't keep up. I usually go with a buffer size of 64 samples per second.

When yous're mixing, you'll want to turn the buffer size up. You want the best audio quality possible for your mix, and then pick the highest buffer size bachelor.

Key Commands: The Ultimate Time Saver

We won't go also far in depth on these. A primal command is a key (or set of keys) on your calculator'southward keyboard that completes a specific function when pressed.

For instance, pressing the command + Z buttons at the same time will undo your previous action.

Logic Pro has a lot of key commands. Learning them will help you work quicker, but they tin can accept some time to become the hang of.

Below is a listing of the most important key commands you should know when you're getting started in Logic Pro.

Using key commands, y'all can start recording just by pressing R.

You can play and pause your song by pressing the spacebar instead of hit the play and stop buttons in Logic Pro.

Get comfortable with these basic key commands, and Logic Pro will experience a lot more than intuitive.

NOTE: Nosotros just released a bully new video on how to solve Logic's stupidest problem, with PlugSearch:

Trying to learn to utilize Logic Pro X? Y'all're in luck. It may seem complicated right now, but past reading this guide, yous'll larn everything you demand to know to turn your ideas into full songs. Nosotros're covering ALL the nuts of this incredible DAW. Before nosotros get started, though, make sure to grab my fre

Part 2: Recording Audio Tracks Logic Pro Ten

Now that yous know what you lot're looking at hither, it's time to offset making some tracks.

Practiced news, making new tracks is super easy! Just click the "+" push button that's below the main interface.

A new window volition pop up where you can cull to create an audio track or a software musical instrument (i.e., a MIDI channel).

For at present, nosotros're going to focus on audio channels. Make sure to double check that the input is correct.

Under the word "Input," in that location'll exist a button where you tin can change your sound input. If your mic is plugged into the first input of your audio interface, you'll pick input ane.

Now you have an audio runway in your project!

You lot tin can mute and solo this channel with the "M" and "S" buttons. Modify the volume with the fader and identify the rails farther in the left or right with the pan knob.

When working with an sound rail, I similar to leave the Inspector window open.

This window gives us a ton of other options for effects. But we'll talk about that more later.

Important: Record Enabling and Input Monitoring

Earlier you outset recording, brand sure your track is tape enabled. Before Logic Pro tin record annihilation, yous have to tell it what rails(s) you desire to record with.

All you have to do is click the "R" on your audio track. If information technology's cherry, your track is ready to tape!

Only striking R on your calculator'due south keyboard and now you're tracking!

If you desire to hear what you're recording as you record information technology, make sure the "I" button on your sound track is on. You lot'll know it's on when it lights up orange.

This is the Input Monitoring button. It plays the audio you're recording through your output device.

While recording audio, mind to your song through headphones. If you're listening through speakers, yous'll get a lot of extra noise in your recording. You may fifty-fifty create a feedback loop.

Recording Multiple Takes

Logic Pro makes it super easy to record multiple takes.

Recording over an existing sound clip won't get rid of information technology. It'll add the new recording to a list of takes that you lot tin can choose from.

If you're having trouble nailing a functioning, try recording it multiple times.

Say you mess up at the commencement of i take and at the end of another. You can cut the two together to create 1 solid recording.

To see all of the takes you've recorded, just click the dropdown arrow on the track.

This arrow volition automatically show up once you've recorded multiple takes. Clicking on a take will change which one you lot're listening to.

To combine recordings, click and drag on the sections of each have y'all want to continue. Blueish sections are aural while grey sections are muted.

In one case you lot're happy with a combination of takes, you tin merge them into a single sound file. Simply click the capital letter "A" on the runway and select "Flatten and Merge."

This'll get rid of all the other takes yous recorded, so make sure you're happy with the manner your track'south sounding!

Trying to learn to apply Logic Pro 10? Yous're in luck. It may seem complicated right now, but by reading this guide, you'll acquire everything you need to know to plough your ideas into full songs. We're roofing ALL the basics of this incredible DAW. Before we become started, though, brand sure to catch my fre

Part 3: Editing Sound Tracks Logic Pro X

Once yous've laid down some sound tracks, you may want to change them.

For example, yous may decide that your guitar part sounds better in the chorus instead of the verse.

To split 1 section of a recording from the residual of the region, set your playback caput where y'all desire to separate it. It'south best to dissever regions in places where the audio is mostly silent.

Then, split the region by pressing command + T at the same time. Make sure the region you're splitting is highlighted, otherwise Logic Pro won't know what you're trying to cut!

You lot can easily motility a recording by clicking on it and dragging it to the left or right. In one case you've cutting out the section y'all desire to move, elevate information technology where you lot desire it to get.

If the guitar part y'all've recorded merely fills up half of the section it's in, you don't demand to rerecord it. You can loop the part by clicking on the acme right corner of the region and pulling information technology out to the right.

You can as well shorten the length of the audio file. Click on the left or correct ends of the region and pull it towards the middle of the region.

This can come in handy when you have some extra noise at the beginning or end of a recording that y'all want to get rid of.

The Inspector View

The Inspector View has some incredibly powerful options for editing your audio.

To get the most out of Inspector View, click on the arrow side by side to the discussion "Region." This'll show you a ton of editing options.

If you lot want to modify the pitch of your sound, you tin do and then by dragging upward or downwardly on the "Transpose" option. Each number is a semitone, so if y'all desire to make a recording a full step lower, y'all'd pull the transposition downwardly to -ii.

Commonly I use this equally an issue. Transposing audio typically makes the sound feel a little more digital.

This is also where you can add fades to your recordings.

Click the "More than" button at the lesser of the list of region options. There you lot'll detect more tools, including fading in and fading out.

Calculation Fades in Logic Pro X

Let's say that guitar runway we were talking almost before has a gross fizz at the showtime. You lot'll probably want to add a fade in at the starting time to cut out some of that fizz.

To practice this, only click and drag up next to the words "Fade In." The more y'all drag information technology upwardly, the longer your fade volition be.

If y'all decide the fade is besides long, y'all tin can make information technology shorter by dragging the value down.

By default, the fade is linear. Usually this is fine, only sometimes yous may want the fade to be less gradual.

Past irresolute the bend (located just below the fade in section), you tin make the sound fade in slowly or suddenly.

A negative curve volition fade in most of the manner at the showtime, taking a little more than fourth dimension to achieve full volume.

A positive curve volition exist silent for most of the fade and volition reach full volume quickly once it does fade in.

If your fade is the right length, but doesn't quite sound right, try changing its curve.

All this info is exactly the same for fading out. Just move down to the "Fade Out" section and apply your fade there.

If you're splicing two sound regions together, yous'll desire to apply a crossfade. A crossfade will fade out the audio clip on the left at the same time equally it fades in the clip on the right.

Without a crossfade, you'll hear a nasty pop where the two audio regions run into.

To add together a crossfade, highlight the regions y'all want to combine. So click on the "Type" button nether the Inspector View's Fade Out.

There are a few dissimilar crossfading options. I ordinarily stick with the equal power crossfade.

And then just elevate the Fade Out up, and y'all'll see a fade applied to both the audio regions you've selected.

If you want to learn more than about how y'all can get the most out of fading, check out this commodity.

Bonus Tip: Adjusting the Waveform View

In the upper right-hand corner of Logic Pro, you'll see a blueish button with the epitome of a waveform in it.

By clicking and holding this push button, you can elevate a slider up and down. This will change the size of the sound waveforms in your project.

This really comes in handy while editing. If one phrase of a song part is slightly behind the beat out, yous can easily come across where the singer starts and stops singing.

That way y'all can separate the region without cutting off whatever important sound!

Trying to learn to use Logic Pro X? Y'all're in luck. It may seem complicated right now, only by reading this guide, yous'll learn everything you need to know to turn your ideas into full songs. We're covering ALL the basics of this incredible DAW. Before nosotros go started, though, make sure to grab my fre

Part 4: Mixing Audio Tracks Logic Pro Ten

At present that you've recorded and edited some tracks, information technology's time to start thinking about effects.

I've got a session pulled up in front of me that's sounding all right. The electric guitar is having some trouble cutting through the residuum of the noise.

To aid it shine, I want to add some distortion and EQ.

First, open up the Mix View by pressing command + 2. Here's what the Mix View looks like:

It looks like a lot at first but isn't as complicated as you might think. Each of these vertical sections is a track, and each track has the same mixing options.

You're really merely learning a few things that apply to every track.

For now, we're only going to comprehend the basics of how Logic Pro's mixing interface works. We take tons of articles designed to help y'all hone your mixing chops.

If you desire to get the most out of mixing, be sure to check out some other articles and videos from Musician on a Mission. I recommend starting here.

Showtime off, let's check out the bottom of a channel. Here you'll observe your runway name, solo and mute buttons, as well as the channel'south fader.

To rename a track, merely double click the current proper name and type in a new 1.

As you might look, pulling the aqueduct fader up or down volition increase or subtract the book. In my case, I'm going to plough the guitar track upward so it's more noticeable.

Right higher up the volume fader is a pan knob. By moving this knob all the manner to the left, nosotros'll only hear it out of the left speaker. Pulling information technology all the fashion to the right volition get in but audible from the right.

I'one thousand going to place this guitar part midway between the middle and the far correct. That fashion information technology isn't fighting with the vocal for attention.

Now that the volume and panning are where I want them, let'south add an EQ to the guitar.

To put Logic Pro's stock EQ to the rail, click on the aqueduct'south Audio FX box. This'll open a list of different plugins you can use.

Y'all can find the EQ plugin in the EQ section.

This guitar is sounding kind of muddy and isn't cut through. To help with that, I'thou going to accept out some of the low frequencies and add together presence to the upper mids.

Need more tips on EQing? Check out this tutorial on EQing unlike instruments and this list of common EQ mistakes.

The EQ sounds all correct, but I all the same want to make the guitar a little crunchier. By clicking below the blueish box that opens upwards the EQ, you lot'll run into a dropdown list of unlike mixing plugins you tin can use.

Logic Pro comes with a ton of stock plugins that are really not bad.

I've picked out the "Bright Funky Crisis" preset from Logic Pro's Prune Distortion plugin for this track.

I'm happy with how this guitar sounds, simply it feels too close to the listener. To push the guitar back in the mix, I'm going to add some reverb.

But instead of putting a reverb directly on this aqueduct, I'thou going to use a send.

Sends and Aux Tracks

Sends exercise exactly what they sound like. They send a re-create of the audio from one channel to some other.

Sends are great when you want to put the same result on multiple instruments.

To create a send, click on the box beneath the plugin box. This'll pull upward a list of buses that yous can send the audio to.

Clicking on an empty double-decker creates a new aux track for you to put furnishings on. Aux tracks are a lot similar sound tracks, but you can't tape onto them.

Since I want to put some reverb on this guitar, I'm going to put the Space Designer plugin on my aux track.

Make sure you turn up the output from your send. If you don't practise this, you won't actually send any sound to your aux rail.

To practice this, click and elevate the circle adjacent to the ship. That's the knob that increases the volume of the output of your send. The greener the circumvolve, the louder the ship.

I like the reverb I've put on this guitar, merely it's a bit too much. To make it less abrasive, I've turned down the volume of the aux channel.

If y'all want to make an aux outcome more subtle, yous can turn the fader of the aux aqueduct downwards.

Trying to learn to apply Logic Pro X? Yous're in luck. It may seem complicated right now, but by reading this guide, you'll learn everything you lot need to know to turn your ideas into full songs. Nosotros're covering ALL the basics of this incredible DAW. Before we get started, though, make sure to take hold of my fre

Part v: Using the Stereo Output Channel

As yous look at your various channels, you'll notice ane called the Stereo Output.

Past default, all channels have this set every bit their output. Annihilation you practice to this aqueduct will touch how your unabridged vocal sounds.

If your entire mix is likewise quiet, y'all can turn it up here.

Also, you tin can add together plugins that volition impact the entire mix. For example, if the entire song needs to sound darker, cut some of the high frequencies using an EQ on this aqueduct.

Be conscientious with what y'all put here, though. If you make a bad mix determination on the Stereo Output, your unabridged song mix is going to suffer.

Role half-dozen: Recording MIDI

To create a MIDI track, click that "+" button we used before. This fourth dimension, instead of clicking on "Audio," select "Software Instrument."

Under "Instrument." you can choose what kind of instrument you want to use. For at present, just open up one of the default instrument patches.

Sound engineers insist on having a fancy discussion for everything. Patches are the MIDI version of plugin presets.

Don't allow the jargon scare you off! It's confusing, but after a while it'll become second nature.

You'll come across that you have even so volume and panning functions equally an audio channel. You'll also need to record enable MIDI tracks before recording with them.

The default patch is a squeamish electric piano, but what if we desire to use something else? In that location are a couple means you can change instruments.

The easiest is to open the sound library. Clicking the library push button at the tiptop left of the screen will show y'all a ton of different MIDI patches you tin utilise.

Let's open a bass sound to play with.

Click on the category in the library view and open the Upright Studio Bass preset. I utilise this sound all the time when I desire a jazzy upright bass.

Now you tin lay down some bass parts!

If you don't take a MIDI keyboard to record with, hit command + M on your computer's keyboard. This opens Musical Typing, which'll let y'all play the office on your figurer keyboard.

I travel a lot, so I employ Musical Typing all the time to jot ideas downward while I'yard on the road.

By default, Musical Typing records all the notes at the same velocity. You lot'll need to manually edit the velocities and then the role doesn't sound robotic.

Simply once you get used to writing with Musical Typing, it's honestly a great way to throw ideas downward quickly.

If y'all'd rather add MIDI notes in by hand, click on the scissors button in the chief ship. This opens the MIDI editor window.

Part 7: Using the MIDI Editor Window

This is the MIDI Editor Window. Past default, it shows the Piano Roll, but y'all can also look at the Score and Stride Editor if yous adopt to notate with those.

If you desire to exercise any MIDI editing, this is where you'll usually do it. Hither you lot tin add in MIDI notes by hand.

Past clicking on the image of a cursor in the editor window (or hitting T on your keyboard), yous can select the pencil and eraser tools. These'll let you add together and delete notes.

The brush tool is handy if you want to add a lot of brusque notes in quick succession.

When the pointer tool is selected, you can movement notes around by dragging them upwardly or downward.

A huge part of MIDI editing is quantizing. Quantizing automatically time-aligns MIDI notes so you don't accept to spend forever dragging them into place.

Quantizing MIDI

If your MIDI notes are out of time, endeavor quantizing them. Select all the notes yous want to move and hitting Q on your keyboard. When you practice, sentinel the notes snap to the filigree.

Y'all can even change the subdivision you want to quantize at. With a part that changes notes quickly, y'all might want to set the subdivision to 1/32 Note. For a slow function, one/8 Note might be ameliorate.

Setting the right notation value volition make sure your notes snap to the correct part of the filigree.

Office 8: Making MIDI Audio Realistic

MIDI is an incredible tool, but if you lot aren't careful, your MIDI parts can end up sounding robotic.

Fortunately, there are a few tools we tin can use to make a MIDI instrument sound more than like the real thing.

Quantization Strength

While quantization is cracking for tightening upwardly a performance, information technology sounds a fleck too flawless. Afterwards all, a human wouldn't exist able to play every note perfectly on trounce. To make quantized MIDI audio more homo, you'll want to turn down the quantization "Strength."

By default, the quantization Strength is set at 100. This means the MIDI notes are 100% on the beat. By turning the Strength down, the notes will still be mostly in fourth dimension, only won't exist so robotic.

I usually set quantization Strength effectually eighty. If I desire a part to sound more loose, I'll gear up it somewhere between l and 70.

Another crucial part of making realistic MIDI is velocity.

Changing the Velocity of MIDI Notes

Velocity is merely a fancy music word for volume. The velocity of a MIDI note determines how loudly and how intensely the MIDI note is played.

The higher the velocity, the louder the annotation. When playing instruments, people naturally play each note at different velocities.

So to make a MIDI part sound more than realistic, it's super of import that we vary the velocity.

There are a couple of different means to change the velocity of MIDI notes. One is by opening the MIDI Automation Window.

With the Piano Whorl selected, press A. You'll see an automation window open at the bottom of the screen.

This window has a dropdown menu with a ton of things you can automate. For at present, we'll just focus on the "Annotation Velocity" option.

Past clicking and dragging the greenish bars here, y'all can change the velocity of your MIDI notes. Y'all can even describe crescendos and decrescendos by drawing a line moving upwardly or down!

This is great for editing a lot of notes at once. If you but desire to edit the velocity of a couple notes, select the "Velocity Tool" in the MIDI Editor.

With the Velocity Tool on, elevate the annotation up to increase the velocity or down to subtract it.

Humanization

Humanization automatically makes minor changes to the timing and velocity of MIDI notes. To quickly get a realistic sounding performance, humanize your MIDI.

Right click on the MIDI region you lot desire to humanize and scroll downward to the MIDI folder. And so go to the MIDI Transform binder and select "Humanize."

A window should open that looks like this:

By clicking "Select and Operate" at the lesser right, you'll humanize your MIDI region.

The departure is subtle, but it goes a long way.

Part 9: Quick and Easy Drums with Logic Pro'south Drummer

If writing drum parts isn't your forte, Logic Pro's Drummer is a cracking way to become a solid beat for your song in no time at all.

Logic Drummer is a rhythm instrument that comes with premade patterns you lot can utilize to spice your vocal up.

To create a Drummer track, hit the "+" button again and select the "Drummer" on the right.

Drummer is really powerful with plenty of flexibility. The first thing you lot'll observe when yous open Drummer is the drummer library.

Drummer comes with a agglomeration of different drummer profiles.

These drummers have personalities and styles. Like Rose who specializes in Modern R&B, or Aiden who plays Indie Pop.

Each drummer also has their own unique patterns. Rose's patterns are tight and minimalistic, while Aiden'due south rhythms are loose and busier. You can cycle through each drummer's patterns by clicking on the different beat presets.

I'1000 a big fan of tight drum sounds, so I've chosen Rose as my drummer.

Once you lot've picked a drummer, you tin can change what kit they're playing.

Right below the list of drummers is a list of drum kits. Listen through all of them and decide which one works for you.

By default, Rose uses the "Slow Jam" kit, but I want a drum kit with a boomier kick. After listening through a few options, I like how the "Roots" kit sounds.

(I also chose this kit because I'thousand in love with QuestLove. QuestLove, if you're reading this, call me).

To the correct of the beat patterns, you can change the dynamics and complexity of your blueprint.

For a simple, quiet rhythm, move the yellow circumvolve downward and to the left. If you desire a really bombastic part, pull the yellow circumvolve up and to the right.

Making Your Drummer Track Feel More Lifelike

Drummer is a wonderful tool. Only if y'all just proceed looping the aforementioned pattern, information technology'll go obvious that it's not a real drummer.

Here are a few things you lot tin do to make Drummer sound more like the existent matter.

A real drummer won't play the same pattern throughout the entire song. Using a dissimilar blueprint for the verse than the chorus is a good way to button the vocal forward.

You tin can even brand the get-go one-half of i department different from the 2d one-half. Imagine you accept a verse that's quiet and laid back for the showtime 8 confined merely picks upward steam for the second viii.

Press the yellow plus sign to the right of your pattern. This'll copy the design over.

Highlight the 2nd blueprint. Then movement the yellow circle from the dynamics and complexity grid.

This'll brand a slightly unlike pattern play during the 2nd one-half of the poesy, building energy.

Yous can also add occasional fills by turning up the "Fills" knob. Changing the fill knob from design to blueprint volition also add some nice variation to your pulsate part.

To get more out of Logic Pro's Drummer, check out this tutorial that covers all of Drummer's bones features.

Trying to learn to utilize Logic Pro X? You're in luck. It may seem complicated correct now, but by reading this guide, you'll learn everything you need to know to turn your ideas into total songs. We're covering ALL the nuts of this incredible DAW. Earlier we get started, though, make sure to catch my fre

UPDATE: Here's a great tutorial on how to make a beat out in Logic Pro X:

Trying to learn to apply Logic Pro X? Y'all're in luck. Information technology may seem complicated right now, but by reading this guide, you'll learn everything you need to know to turn your ideas into total songs. We're covering ALL the basics of this incredible DAW. Before we go started, though, make sure to grab my fre

Part x: Using Your Own Samples in Logic

Logic Pro 10 comes with a ton of groovy synths and samples for you lot to play effectually with. Just sometimes yous may want to apply your own samples that you've recorded or downloaded from the internet.

And Logic'south 10.5 update has made sampling easier than ever!

Just open up a software instrument and select "Quick Sampler" from the musical instrument console.

Quick Sampler lets yous elevate and driblet samples right into it. It'll automatically pitch the sample upward and downward. And so if you lot load a keyboard sample in, you tin can play it back at dissimilar notes.

The "Slice" feature is besides very handy. It automatically chops the sample upward into bite sized chunks.

This makes information technology super easy to create your ain shell of a drum loop, or chop and spiral some vocals.

Unlike Quick Sampler, the regular "Sampler" plugin volition allow you lot use multiple samples at once.

First, you'll want to click on "Zone."

Then, just drag and drop your sample into the zone window.

If you want to load multiple sounds into the sampler, you'll need to map each audio to specific keys.

For example, say you load a kick and a snare. You'll probably want the kick to trigger when you play C1 and the snare to trigger when you play D1.

Open up the "Mapping" carte. Drag and drop the samples in.

And so set the "Key" where yous desire it. In this instance, I'll make sure the Kick is set up to C1 and the Snare is on D1.

I as well recommend checking out everything else in Sampler.

Some of the presets are admittedly stellar. The solo clarinet is fire. I recommend looking through its entire library.

Trying to larn to use Logic Pro Ten? Y'all're in luck. It may seem complicated correct now, but by reading this guide, you'll larn everything you need to know to turn your ideas into total songs. We're covering ALL the basics of this incredible DAW. Before we go started, though, make certain to take hold of my fre

Role 11: Getting Artistic with Apple tree Loops

Another way to go great sounds quickly is by using Apple Loops.

Logic Pro comes loaded with a agglomeration of nice loops that automatically match your project'south tempo. Whether your song is lxxx BPM or 140, Apple Loops will match the tempo seamlessly.

To check out these loops, click on the Loop Browser push in the top right. This'll pop open up a library of loops that you can use in any song.

If you're looking for something in particular, just blazon it into the loops search bar.

Pro tip: the shakers in Apple Loops are top notch. Feel like your chorus needs some more than energy? Throw a shaker loop on that bad boy and mix information technology in so you lot barely hear it. BAM. You've got an instant hit.

You tin can go extra creative by loading these loops into EXS24. Here you tin change the filtering, envelopes, and LFO settings of the loop.

Mangle these settings enough, and y'all might finish up with a completely new sound!

And that's just the beginning!

Logic's 10.v update brought tons of exciting new features to the DAW. Take a wait at all of the new ways to make music in Logic x.5:

Trying to acquire to utilize Logic Pro X? You're in luck. It may seem complicated correct now, but by reading this guide, yous'll acquire everything you need to know to plough your ideas into full songs. We're covering ALL the nuts of this incredible DAW. Before we become started, though, brand sure to take hold of my fre

Conclusion: Logic Pro Tutorial

And there you lot have it! Everything you demand to know to harness your inventiveness in Logic Pro X.

If you discover yourself confused nearly any of Logic'southward features, check back over the relevant section from this guide:

1. Getting Comfortable with Logic Pro's Visual Interface
2. How to Record Audio Tracks
3. Editing Sound Tracks
4. Mixing Audio in the Mix View
5. Logic Pro'southward Stereo Output Channel
6. Recording MIDI
7. Editing MIDI
8. Making MIDI Sound Realistic
9. Using Logic Pro's Drummer for Quick and Like shooting fish in a barrel Drums
10. Importing Your Ain Samples into Logic Pro
11. Getting Artistic with Apple Loops

By getting familiar with both parts of this guide, you'll be ready to outset making professional sounding songs in Logic Pro X.

Before y'all get, make sure to catch the Complimentary cheat sheet I made upward for this guide to Logic Pro.

It'south got tons of helpful tips and lessons to read again and again while you're learning to apply this astonishing software.

Grab your copy here:

Producer and composer for picture and video games. Helping you lot brand music a little more than fun and a little less irksome. Check out my work at Juniper Tapes.

Source: https://www.musicianonamission.com/logic-pro-x-tutorial/

Share this post